search
100mm Moulded No 46 Ogee Cast Aluminium Gutter Union
43CMOUC
Price: £ 15.06
(Inc £18.07)
ARP Legacy 100mm (4 Inch) x 75mm (3 Inch) Moulded No 46 O.G. Cast Aluminium Gutter Union Connector 43CMOUC available in a Plain Mill or Powder Coated Finish
Order in the next Hours Mins and Seconds,
To get your item delivered on Tuesday

100mm (4") x 75mm (3") Moulded No.46 O.G. Cast Aluminium Gutter Union

Legacy Cast Aluminium Moulded No 46 Ogee Gutter Union Connectors are available in Mill Finish and in PPC (Polyester Powder Coating)

Please note - allow ** working days for delivery of ********* options. All aluminium gutters and fittings are specially ordered and are non-returnable. All PPC items are coated external face only.

Manufacturer: ARP
Product Code: 43CMOUC

►Return to product list

From our site to your site as quickly as possible

 

Delivery Charges

We offer a free standard delivery service on all orders over £400* (Exclusions Apply). Orders under £400* will be charged a delivery fee. All delivery charges are calculated at basket and are dependent on the items ordered. Charge is based on delivery to mainland UK excluding Scottish Highlands and Islands where additional charges may apply – this is determined by the courier delivering the goods. For deliveries to these areas, we are happy to provide a free quotation upon request.

 
Delivery Dates and Times

Please see here for latest lead times.
Whilst we will make every effort to deliver your goods within the stated/requested time frame, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules, so we would recommend not to start/schedule any work until the goods arrive. Due to logistics of various couriers and suppliers we are unable to give times of deliveries. Deliveries can take place from as earlier as 07:30 right up to 18:00 depending on the courier/haulier and considering local traffic etc.
 

Signing For Your Goods

All deliveries should be signed for, and we would politely request that you sign and clearly print your name so that in the unlikely event that there are any discrepancies we will have a person to contact. If a signature cannot be obtained, we will try to leave the goods in a safe location, but we cannot be held responsible for shortages or damages where goods have not been signed for.
 

Accepting Your Goods

Please thoroughly check you have received all expected items and any shortages/damages must be reported within 48 hours of delivery. Large or palletised goods will be delivered to a hard standing area only. The Customer shall be solely responsible for the unloading of the Goods and the Seller shall not be liable for any damage that occurs during such unloading.
 

Delivery Vehicle

If goods aren't sent buy our own vehicles, they are sent buy reputable carriers such as Tufnell's, DX, DPD and Parcel Force. Heavier goods may be delivered by larger vehicles and will be off loaded by means of a pump truck; the driver will then deliver by means of the pump truck as close as possible to the property whilst remaining on a hard standing surface.
 

Multiple Deliveries

Sometimes goods can be delivered in multiple deliveries, this is due to some items coming direct from suppliers or our own yard. If this is the case, multiple charges will be combined at the basket.
 

Good Advise

Please do not arrange any labour until your materials are on site as we are unable to compensate you in the event of a late delivery.
 
If you have ANY questions about our products, or want to give us some feedback about your shopping experience with us, please feel free to contact us on 03302 230 275 or email our customer services team
 

*excluding VAT

Moulded No. 46 Ogee Cast Aluminium Guttering Installation and Technical Guides


It is advised that you ensure the fixing background (e.g. fascia board) is securely fixed, level and able to support the weight of the gutter at full capacity and that the roof overhang is correct (see gutter position).

Legacy cast aluminium gutters are fitted using fascia brackets. Buildings without fascias may need a different type of bracketry. ARP offers rise & fall brackets and rafter brackets as options, however due of the variety of installations these do not suit BS/EN levels regarding loading, so advice should be sought on parameters of use.

1-Start by deciding whether to fit the gutter level or with a fall to 1:600. Fit a bracket at each end of a run. Position brackets correctly for an angle or stopend.

2-the ideal bracket positioning for the angle and bracket to take the gutter length. (Max 150 mm from joint).

3-It is recommend fixing brackets every 915mm and using an additional bracket for each outlet or angle. Ideally using a string line or laser level between the two brackets, set out intermediate brackets at maximum centres of 915mm.

4-With the use of a plumb or laser line, position outlets over gullies and support with at least one bracket. Also include a bracket per angle (internal or external).

5-When fitting outlets and angles position the rear face of the gutter underneath the roof finish. Locate the gutter into the fascia bracket and then clip the front edge down into position. After fitting outlets and angles, proceed with fitting the gutter lengths using the same method.

6-Ensure that all fixing surfaces are clean and dry. Apply 2 x 6mm beads of low modulus
sealant into the plain end of the gutter, place the spigot end of the gutter length into sealant.

7-Push bolt through the sole of the plain end of the gutter from the underside and position spigot end of gutter directly over joint. Ensure that the slot is filled with sealant before applying nut and washer, gently tighten. Do not overtighten as this may force the sealant out of the joint.

8-Clean off any excess sealant to either side of the joint. Apply additional sealant as required to the internal face only to create a smooth bead.

N.B. Union connectors are available to allow the use of cut lengths.

Any cut lengths should be de-burred and touched up with touch-up paint supplied prior to installation. For more information or further assistance, please contact us.


Direct Fixing:

It is possible to directly fascia fix Moulded No.46 gutters using 5mm x 25mm stainless steel screws (dependant on substrate) without additional support, although care must be taken to keep fixing through the back face above the waterline, as below this it may effect the calculable, leak free, capacity of the gutter.
Where a gutter sits upon a cornice or cill, it is advisable to have a damp-proof membrane behind and below the gutter.
Fixing centres for “Legacy” Cast Moulded No. 46 Aluminium Guttering is 915mm.

Jointing:

Aluminium has a coeffi cient of expansion equal to 0.00002348mm per °C on average, this equates to just over 1.4mm per metre on a temperature range of -20°C to +40°C. Typically a 3mm to 4mm expansion gap between the ends of the gutter sections is advisable.

ARP recommend & supply Arbosil 1096 Low Modulus Silicone sealant and it is essential that this or a direct equivalent is used to seal the joints as this will ensure a strong mechanical bond that withstands the forces associated with thermal movement.
It is important to observe the sealant manufacturers guidelines concerning application and curing during cold or damp weather conditions & that before assembling the joint all surfaces are clean & free from grease, acetone applied with a soft cloth and wiped dry is recommended.

Cast Moulded No.46 O.G. gutters have a Spigot arrangement that are secured using M6 x 30mm aluminium bolts, neoprene washers and nuts.
Having sited the gutter, apply 2 x 6mm beads of Arbosil 1096 Low Modulus Silicone sealant to the gutter socket. (Fig 2.).The two surfaces can then be brought together, the bolt inserted applying sealant to the thread and round the slot in the union, tighten the joint until some sealant emerges and a feeling of resistance is achieved leaving a 3mm sandwich of sealant. Excess sealant should then be removed. Touch up paint is supplied to touch up all site cut edges

Moulded No 46 Cast Gutter JointingFig 2.

Composition and Manufacture:

‘Legacy” Moulded No.46 O.G. Gutters are manufactured from Aluminium alloy LM27 to BS1474: 1972 & the product complies to, or exceeds all relevant standards. Special fittings for the gutters using fabrication methods involving cut, mitre and welding techniques can be provided.

Note:100x75mm & 125x100mm ranges are left hand systems; 150x100mm range is a right hand system.

Finish:

Mill Finish Aluminium or Polyester Powder Coated to a range of BS or RAL colours.

Model Specification:

ARP heavy grade ‘Legacy’ Gutters and fittings to BS 2997 (EN612) using LM27 alloy aluminium in accordance with BS 1474: 1974. Profi le to be Cast Moulded No.46, size 100mm x 75mm (3.5mm), 125mm x 100mm (3.5mm) & 150 x 100mm (3.5mm). Materials to have factory applied Polyester Powder Coat to all significant surfaces in accordance with BS EN 122026 Matt/Satin/Gloss* finish, or alternatively plain aluminium Mill Finish. All to be supplied by Aluminium Roofline Products Ltd, Unit 2, Vitruvius Way, Meridian Business Park, Braunstone, Leicester LE19 1WA. Tel 0116 2894400 Fax 0116 2894433.
Joints to be loose union connector sealed by application of Arbosil 1096 Low Modulus Silicone Sealant and fastened by M6 x 30mm bolts, neoprene washers and nuts in accordance with the manufacturer’s specifi cation & guidelines. Gutter to be fixed by fascia brackets at 915mm centres with supplementary brackets at or near fittings. Fixing for brackets to be 5mm x 25mm countersunk / domed head stainless steel screws (dependant on substrate)

ARP Legacy Moulded No 46 Guttering Technical Guide
ARP Legacy Moulded No 46 Guttering Installation Guide
 

ARP Standard BS/RAL Polyester Powder Coating Colour Options


ARP can provide your aluminium order either mill finished or Polyester Powder Coated (PPC) by their inhouse PPC facility.

Save time on site by having your order delivered already painted to a colour of your choice.

You can select from any BS/RAL colour.

If you would like a colour swatch sent out please fill in the contact us form here and we will get one to you as quick as possible.

ARP can provide a variety of colours and finishes see below for the standard colours provided.
For other colour options please call us on 03302 230 275 or email us at customerservices@drainagecentral.co.uk.

Please note the image shown below is just an example and a colour swatch is recommended to show true representation.


 
Oyster White RAL 1013 ARP Standard Colour Range Ultramarine Blue RAL 5002
Moss Green RAL 6005 Mouse Grey RAL 7005 Basalt Grey RAL 7012
Slate Grey RAL 7015 Anthracite Grey RAL 7016 Graphite Grey RAL 7024
Light Grey RAL 7035 Dusty Grey RAL 7037 Agate Grey RAL 7038
Chocolate Brown RAL 8017 Jet Black RAL 9005 Pure White RAL 9010
Traffic White RAL 9016 Bitter Chocolate BS 08 B29 Traffic Red RAL 3020

For any further details please call our customer service team.

100mm (4") x 75mm (3") Moulded No.46 O.G. Cast Aluminium Gutter Union

Legacy Cast Aluminium Moulded No 46 Ogee Gutter Union Connectors are available in Mill Finish and in PPC (Polyester Powder Coating)

Please note - allow ** working days for delivery of ********* options. All aluminium gutters and fittings are specially ordered and are non-returnable. All PPC items are coated external face only.

Manufacturer: ARP
Product Code: 43CMOUC

►Return to product list

From our site to your site as quickly as possible

 

Delivery Charges

We offer a free standard delivery service on all orders over £400* (Exclusions Apply). Orders under £400* will be charged a delivery fee. All delivery charges are calculated at basket and are dependent on the items ordered. Charge is based on delivery to mainland UK excluding Scottish Highlands and Islands where additional charges may apply – this is determined by the courier delivering the goods. For deliveries to these areas, we are happy to provide a free quotation upon request.

 
Delivery Dates and Times

Please see here for latest lead times.
Whilst we will make every effort to deliver your goods within the stated/requested time frame, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules, so we would recommend not to start/schedule any work until the goods arrive. Due to logistics of various couriers and suppliers we are unable to give times of deliveries. Deliveries can take place from as earlier as 07:30 right up to 18:00 depending on the courier/haulier and considering local traffic etc.
 

Signing For Your Goods

All deliveries should be signed for, and we would politely request that you sign and clearly print your name so that in the unlikely event that there are any discrepancies we will have a person to contact. If a signature cannot be obtained, we will try to leave the goods in a safe location, but we cannot be held responsible for shortages or damages where goods have not been signed for.
 

Accepting Your Goods

Please thoroughly check you have received all expected items and any shortages/damages must be reported within 48 hours of delivery. Large or palletised goods will be delivered to a hard standing area only. The Customer shall be solely responsible for the unloading of the Goods and the Seller shall not be liable for any damage that occurs during such unloading.
 

Delivery Vehicle

If goods aren't sent buy our own vehicles, they are sent buy reputable carriers such as Tufnell's, DX, DPD and Parcel Force. Heavier goods may be delivered by larger vehicles and will be off loaded by means of a pump truck; the driver will then deliver by means of the pump truck as close as possible to the property whilst remaining on a hard standing surface.
 

Multiple Deliveries

Sometimes goods can be delivered in multiple deliveries, this is due to some items coming direct from suppliers or our own yard. If this is the case, multiple charges will be combined at the basket.
 

Good Advise

Please do not arrange any labour until your materials are on site as we are unable to compensate you in the event of a late delivery.
 
If you have ANY questions about our products, or want to give us some feedback about your shopping experience with us, please feel free to contact us on 03302 230 275 or email our customer services team
 

*excluding VAT

Moulded No. 46 Ogee Cast Aluminium Guttering Installation and Technical Guides


It is advised that you ensure the fixing background (e.g. fascia board) is securely fixed, level and able to support the weight of the gutter at full capacity and that the roof overhang is correct (see gutter position).

Legacy cast aluminium gutters are fitted using fascia brackets. Buildings without fascias may need a different type of bracketry. ARP offers rise & fall brackets and rafter brackets as options, however due of the variety of installations these do not suit BS/EN levels regarding loading, so advice should be sought on parameters of use.

1-Start by deciding whether to fit the gutter level or with a fall to 1:600. Fit a bracket at each end of a run. Position brackets correctly for an angle or stopend.

2-the ideal bracket positioning for the angle and bracket to take the gutter length. (Max 150 mm from joint).

3-It is recommend fixing brackets every 915mm and using an additional bracket for each outlet or angle. Ideally using a string line or laser level between the two brackets, set out intermediate brackets at maximum centres of 915mm.

4-With the use of a plumb or laser line, position outlets over gullies and support with at least one bracket. Also include a bracket per angle (internal or external).

5-When fitting outlets and angles position the rear face of the gutter underneath the roof finish. Locate the gutter into the fascia bracket and then clip the front edge down into position. After fitting outlets and angles, proceed with fitting the gutter lengths using the same method.

6-Ensure that all fixing surfaces are clean and dry. Apply 2 x 6mm beads of low modulus
sealant into the plain end of the gutter, place the spigot end of the gutter length into sealant.

7-Push bolt through the sole of the plain end of the gutter from the underside and position spigot end of gutter directly over joint. Ensure that the slot is filled with sealant before applying nut and washer, gently tighten. Do not overtighten as this may force the sealant out of the joint.

8-Clean off any excess sealant to either side of the joint. Apply additional sealant as required to the internal face only to create a smooth bead.

N.B. Union connectors are available to allow the use of cut lengths.

Any cut lengths should be de-burred and touched up with touch-up paint supplied prior to installation. For more information or further assistance, please contact us.


Direct Fixing:

It is possible to directly fascia fix Moulded No.46 gutters using 5mm x 25mm stainless steel screws (dependant on substrate) without additional support, although care must be taken to keep fixing through the back face above the waterline, as below this it may effect the calculable, leak free, capacity of the gutter.
Where a gutter sits upon a cornice or cill, it is advisable to have a damp-proof membrane behind and below the gutter.
Fixing centres for “Legacy” Cast Moulded No. 46 Aluminium Guttering is 915mm.

Jointing:

Aluminium has a coeffi cient of expansion equal to 0.00002348mm per °C on average, this equates to just over 1.4mm per metre on a temperature range of -20°C to +40°C. Typically a 3mm to 4mm expansion gap between the ends of the gutter sections is advisable.

ARP recommend & supply Arbosil 1096 Low Modulus Silicone sealant and it is essential that this or a direct equivalent is used to seal the joints as this will ensure a strong mechanical bond that withstands the forces associated with thermal movement.
It is important to observe the sealant manufacturers guidelines concerning application and curing during cold or damp weather conditions & that before assembling the joint all surfaces are clean & free from grease, acetone applied with a soft cloth and wiped dry is recommended.

Cast Moulded No.46 O.G. gutters have a Spigot arrangement that are secured using M6 x 30mm aluminium bolts, neoprene washers and nuts.
Having sited the gutter, apply 2 x 6mm beads of Arbosil 1096 Low Modulus Silicone sealant to the gutter socket. (Fig 2.).The two surfaces can then be brought together, the bolt inserted applying sealant to the thread and round the slot in the union, tighten the joint until some sealant emerges and a feeling of resistance is achieved leaving a 3mm sandwich of sealant. Excess sealant should then be removed. Touch up paint is supplied to touch up all site cut edges

Moulded No 46 Cast Gutter JointingFig 2.

Composition and Manufacture:

‘Legacy” Moulded No.46 O.G. Gutters are manufactured from Aluminium alloy LM27 to BS1474: 1972 & the product complies to, or exceeds all relevant standards. Special fittings for the gutters using fabrication methods involving cut, mitre and welding techniques can be provided.

Note:100x75mm & 125x100mm ranges are left hand systems; 150x100mm range is a right hand system.

Finish:

Mill Finish Aluminium or Polyester Powder Coated to a range of BS or RAL colours.

Model Specification:

ARP heavy grade ‘Legacy’ Gutters and fittings to BS 2997 (EN612) using LM27 alloy aluminium in accordance with BS 1474: 1974. Profi le to be Cast Moulded No.46, size 100mm x 75mm (3.5mm), 125mm x 100mm (3.5mm) & 150 x 100mm (3.5mm). Materials to have factory applied Polyester Powder Coat to all significant surfaces in accordance with BS EN 122026 Matt/Satin/Gloss* finish, or alternatively plain aluminium Mill Finish. All to be supplied by Aluminium Roofline Products Ltd, Unit 2, Vitruvius Way, Meridian Business Park, Braunstone, Leicester LE19 1WA. Tel 0116 2894400 Fax 0116 2894433.
Joints to be loose union connector sealed by application of Arbosil 1096 Low Modulus Silicone Sealant and fastened by M6 x 30mm bolts, neoprene washers and nuts in accordance with the manufacturer’s specifi cation & guidelines. Gutter to be fixed by fascia brackets at 915mm centres with supplementary brackets at or near fittings. Fixing for brackets to be 5mm x 25mm countersunk / domed head stainless steel screws (dependant on substrate)

ARP Legacy Moulded No 46 Guttering Technical Guide
ARP Legacy Moulded No 46 Guttering Installation Guide
 

ARP Standard BS/RAL Polyester Powder Coating Colour Options


ARP can provide your aluminium order either mill finished or Polyester Powder Coated (PPC) by their inhouse PPC facility.

Save time on site by having your order delivered already painted to a colour of your choice.

You can select from any BS/RAL colour.

If you would like a colour swatch sent out please fill in the contact us form here and we will get one to you as quick as possible.

ARP can provide a variety of colours and finishes see below for the standard colours provided.
For other colour options please call us on 03302 230 275 or email us at customerservices@drainagecentral.co.uk.

Please note the image shown below is just an example and a colour swatch is recommended to show true representation.


 
Oyster White RAL 1013 ARP Standard Colour Range Ultramarine Blue RAL 5002
Moss Green RAL 6005 Mouse Grey RAL 7005 Basalt Grey RAL 7012
Slate Grey RAL 7015 Anthracite Grey RAL 7016 Graphite Grey RAL 7024
Light Grey RAL 7035 Dusty Grey RAL 7037 Agate Grey RAL 7038
Chocolate Brown RAL 8017 Jet Black RAL 9005 Pure White RAL 9010
Traffic White RAL 9016 Bitter Chocolate BS 08 B29 Traffic Red RAL 3020

For any further details please call our customer service team.
Customer Reviews (0)