100mm Timesaver Cast Iron Soil Pipe Short Radius 45 Degree Bend
Saint-Gobain PAM UK Cast Iron Timesaver Soil Pipe System is Available in a range of pipe diameters with an exstensive range of fittings and to suit any project.
Saint-Gobain PAM UK are market leaders in the supply of Cast iron soil, drainage and rainwater systems.
Benefits of Cast Iron
- Non-combustible fire rated A1
- Excellent acoustic properties
- Minimal expansion
- Strong and robust
- Excellent environmental properties
- Made from up to 99% recycled content
- 100% recyclable
- Long life span
Timesaver Soil Coating
- 3m Pipes Internally lined with an ochre two-part epoxy coating
- Externally coated in a black acrylic paint.
- Fittings and couplings, Internally and externally coated in a black waterbased paint
- The Timesaver coating shall accept over-coating (Overpainting) with alkyd and water based paints normally used on metallic structures
The Cast Iron Soil Pipe Timesaver range include heritage push-fit couplings that turns a mechanical pipe system into a system with the traditional cast iron appearance.
The Timesaver heritage couplings have been accepted by recognised bodies for all grade listed properties ie. National Heritage, English etc. Its primer black coating makes it easy to overpaint for external soil stacks, and is the perfect solution for listed buildings and those situated in areas of conservation.
Prestigious commercial buildings built in the 1970’s to the mid 90’s which are serviced by cast iron soil stacks, will most likely be Timesaver. If the building is to be refurbished and changes are required, the latest Timesaver range is best suited to connect to the original pipework.
Please Note: Timesaver soil fittings were traditionally supplied with a raised bead on the spigot ends, which over the years have been removed. The couplings can only be used on fittings without the bead.
Manufacturer: Saint-Gobain PAM UK
Product Code: 191626
Return to product list
From our site to your site as quickly as possible
Delivery Charges
We can offer a free standard delivery service on specific ranges if your order reaches the thresholds stated below (Exclusions Apply). Orders under thesholds below will be charged a delivery fee. All delivery charges are calculated at basket and are dependent on the items ordered. Charge is based on delivery to mainland UK excluding Scottish Highlands and Islands where additional charges may apply – this is determined by the courier delivering the goods. For deliveries to these areas, we are happy to provide a free quotation upon request.
Free Delivery Thresholds
Brett Martin Ranges - Orders over £1600 (Ex VAT)
ARP Ranges - Order over £1200 (Ex VAT)
Free Delivery Exclusions
All Lindab Products
All Pam Saint-Gobain Products
Delivery Dates and Times
Please see here for latest estimated lead times.
Whilst we will make every effort to deliver your goods within the stated/requested time frame, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules, so we would recommend not to start/schedule any work until the goods arrive. Due to logistics of various couriers and suppliers we are unable to give times of deliveries. Deliveries can take place from as earlier as 07:30 right up to 18:00 depending on the courier/haulier and considering local traffic etc.
Signing For Your Goods
All deliveries should be signed for, and we would politely request that you sign and clearly print your name so that in the unlikely event that there are any discrepancies we will have a person to contact. If a signature cannot be obtained, we will try to leave the goods in a safe location, but we cannot be held responsible for shortages or damages where goods have not been signed for.
Accepting Your Goods
Please thoroughly check you have received all expected items and any shortages/damages must be reported within 48 hours of delivery. Large or palletised goods will be delivered to a hard standing area only. The Customer shall be solely responsible for the unloading of the Goods and the Seller shall not be liable for any damage that occurs during such unloading.
Delivery Vehicle
If goods aren't sent buy our own vehicles, they are sent buy reputable carriers such as Tufnell's, DX, DPD and Parcel Force. Heavier goods may be delivered by larger vehicles and will be off loaded by means of a pump truck; the driver will then deliver by means of the pump truck as close as possible to the property whilst remaining on a hard standing surface.
Multiple Deliveries
Sometimes goods can be delivered in multiple deliveries, this is due to some items coming direct from suppliers or our own yard. If this is the case, multiple charges will be combined at the basket.
Good Advice
Please do not arrange any labour until your materials are on site as we are unable to compensate you in the event of a late delivery.
If you have ANY questions about our products, or want to give us some feedback about your shopping experience with us, please feel free to contact us on 03302 230 275 or email our customer services team
*excluding VAT
PAM Saint-Gobain Cast Iron Timesaver Soil Pipe Installation Guidance
Jointing Method
A. Pipe or fitting
B. Pipe or fitting
C. Synthetic rubber gasket
D. Coupling
E. Set screws and nuts
50, 75 and 100 diameter couplings have two set screws and nuts. 150 couplings have four set screws and nuts.
Couplings are supplied ready assembled
1. Slacken bolts to fullest extent.
2. Place synthetic rubber gasket on end of pipe or fitting A, and slide loosely assembled coupling over pipe B.
3. Fit pipe B into gasket ensuring both A and B are butting against the internal central register.
4. Slide coupling over gasket ensuring that it is centrally located and tighten bolts alternately so that the gap between coupler halves is even on both sides. When hand tight check alignment of assembly.
5. Complete tightening operation by use of a Ratchet Spanner – EF100 with Deep Socket – EF101 until a suitable resistance is achieved (min 20Nm).
Joints may be deflected up to 5° without affecting the sealing properties.
The Timesaver couplings meet the performance requirements of BS 6087:1990 and incorporate synthetic rubber gaskets conforming to BS EN 681-1/ISO 4633 and set screws and nuts.
A Ratchet Spanner – EF100 is the recommended tool required to tighten the set screws which give a ‘for all time seal’ water and airtight installation.
Saint-Gobain PAM UK does not accept liability for any complaints on installations where components not manufactured by Saint-Gobain PAM UK are included.
Electrical Continuity
Designed for use in situations where equipotential bonding (earthing) has been specified, the Timesaver electrical continuity clips are available for use with Timesaver soil and Timesaver drain systems.
The Timesaver electrical continuity clip fits a standard Timesaver coupling. Only one electrical continuity clip is required per coupling. Note: The electrical continuity test should be carried out in accordance with BS 6087.
Continuity clips
These are supplied separately to the coupling in standard quantity bags of 25 number.
Coupling |
Product code |
Ref no. |
To Suit 50, 75, 100 GT01 |
191189 |
GT96S |
To Suit 150 TD01, 100, 150TD01 |
191190 |
GT96L |
To Suit 100 TD02 |
191191 |
GT96T |
To Suit 150 TD02 |
191192 |
GT96T6 |
To suit 225 TD01 |
191193 |
GT96 |
Assembly instructions
1. Slacken bolts to fullest extent.
2. Place synthetic rubber gasket C on pipe or fitting A and slide loosely assembled coupling over pipe B.
3. Fit pipe B into gasket ensuring both A and B are butting up to central register.
4. Fit continuity clip D centrally by peeling back one edge of the gasket and slipping it into the Continuity clip.
5. Repeat for other edge of gasket, so the gasket is held within the continuity clip D.
6. Position clip at 90° to gasket ears and in the direction of the pipe run.
7. Slide coupling over gasket and tighten bolts alternately so that the gap is even on both sides. When hand tight check alignment.
8. Complete tightening operation by use of a ratchet spanner – EF100 and deep socket – EF101 (min 20Nm).
Note: Use one continuity clip per coupling joint. Continuity clip must not be reused after tightening.
The installation should be tested to BS EN 12056 for a soil installation or to BS EN 752 for a drain installation and to IEE Regulations on equipotential bonding (earthing).
Provided that the Timesaver electrical continuity coupling is assembled and installed as recommended in our instructions, and the pipework is bonded to the main electrical earth or similar earth, it is considered that the Timesaver electrical continuity coupling will satisfy the IEE Regulations.
It is recommended that the installation is regularly checked for equipotential bonding (earthing) in case of accidental damage, unauthorised pipework modifications, etc.
If a Timesaver electrical continuity installation is to be modified for any reason Timesaver electrical continuity couplings must be used and the installation re-tested for equipotential bonding (earthing).
Technical references
It is recommended that these and other listed technical advice, within this manual, are read in conjunction with the following Codes of Practice:
BS EN 12056 Gravity Drainage Systems Inside Building:
Part 2 – Sanitary Pipework
Part 3 – Roof Drainage
BS EN 752 Drains and Sewers Outside Building.
BS 437 and BS 416 Part 2.
Technical Guides
PAM Saint-Gobain Cast Iron Timesaver Soil Pipe Guide
PAM Saint-Gobain Cast Iron Soil and Drain Standards Guide
Any other questions please click here to see the contact us page.