Contact Us
Item Code: 54VOAX90

125mm Vintage Ogee Aluminium Snap Fit External Gutter Angle 90 Degrees

£36.49
(£30.41 Excl VAT )
ARP Sentinel 125mm x 100mm Vintage O.G. Snap-fit Aluminium Gutter Angle 90 Degree External 54VOAX90 available in a Plain Mill or Powder Coated Finish
Est. Delivery 7 - 10 Working Days
Order in the next Hours Mins and Seconds,
To get your item delivered on Tuesday

125mm (5") x 100mm (4") Snap Fit Aluminium Vintage Ogee 90 Degree External Gutter Angle (image shows internal gutter angle)


Sentinel Vintage O.G. Snap Fit Extruded Aluminium Gutter Angles are available in Mill Finish and in PPC (Polyester Powder Coating)

Aluminium Gutter Angles are supplied with one union connector free of charge

Please note -  All aluminium gutters and fittings are specially ordered and are non-returnable. All PPC items are coated external face only.

Manufacturer: ARP

Product Code: 54VOAX90

Return to product list

From our site to your site as quickly as possible

Delivery Charges

We can offer a free standard delivery service on specific ranges if your order reaches the thresholds stated below (Exclusions Apply). Orders under thesholds below will be charged a delivery fee. All delivery charges are calculated at basket and are dependent on the items ordered. Charge is based on delivery to mainland UK excluding Scottish Highlands and Islands where additional charges may apply – this is determined by the courier delivering the goods. For deliveries to these areas, we are happy to provide a free quotation upon request.

Free Delivery Thresholds
Brett Martin Ranges - Orders over £1600 (Ex VAT)
ARP Ranges - Order over £1200 (Ex VAT)

Free Delivery Exclusions
All Lindab Products
All Pam Saint-Gobain Products


Delivery Dates and Times

Please see here for latest estimated lead times.
Whilst we will make every effort to deliver your goods within the stated/requested time frame, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules, so we would recommend not to start/schedule any work until the goods arrive. Due to logistics of various couriers and suppliers we are unable to give times of deliveries. Deliveries can take place from as earlier as 07:30 right up to 18:00 depending on the courier/haulier and considering local traffic etc.
 

Signing For Your Goods

All deliveries should be signed for, and we would politely request that you sign and clearly print your name so that in the unlikely event that there are any discrepancies we will have a person to contact. If a signature cannot be obtained, we will try to leave the goods in a safe location, but we cannot be held responsible for shortages or damages where goods have not been signed for.
 

Accepting Your Goods

Please thoroughly check you have received all expected items and any shortages/damages must be reported within 48 hours of delivery. Large or palletised goods will be delivered to a hard standing area only. The Customer shall be solely responsible for the unloading of the Goods and the Seller shall not be liable for any damage that occurs during such unloading.
 

Delivery Vehicle

If goods aren't sent buy our own vehicles, they are sent buy reputable carriers such as Tufnell's, DX, DPD and Parcel Force. Heavier goods may be delivered by larger vehicles and will be off loaded by means of a pump truck; the driver will then deliver by means of the pump truck as close as possible to the property whilst remaining on a hard standing surface.
 

Multiple Deliveries

Sometimes goods can be delivered in multiple deliveries, this is due to some items coming direct from suppliers or our own yard. If this is the case, multiple charges will be combined at the basket.
 

Good Advice

Please do not arrange any labour until your materials are on site as we are unable to compensate you in the event of a late delivery.
 
If you have ANY questions about our products, or want to give us some feedback about your shopping experience with us, please feel free to contact us on 03302 230 275 or email our customer services team
 

*excluding VAT

ARP Sentinel Vintage Ogee Guttering And Fittings


We advise that you ensure the fixing background (e.g fascia board) is securely fixed, level and able to support the weight of the gutter at full capacity and that the roof overhang is correct.

Sentinel Vintage Ogee guttering is fitted using fascia brackets. Buildings without fascias may need a different type of bracketry. ARP offer a range of brackets to suit most applications. ARP offer side and top fix rafter arms as well as rise and fall brackets. The latter do not meet current BS/EN load requirements so advise should be sort on the parameter of their use.

1-Start by deciding whether to fit the gutter level or with a fall to 1:600. Fit a bracket at each end of a run. Position brackets correctly for an angle or stopend.

2- The image above shows the bracket for the angle and a bracket to take the gutter length.

3-It is recommend fixing brackets every 750mm and using an additional bracket for each outlet or angle. Ideally using a string line or laser level between the two brackets, set out intermediate brackets at maximum centres of 750mm.

4-With the use of a plumb or laser line, position outlets over gullies and support
with at least one bracket. Also include a bracket per angle (internal or external).

5-When fitting outlets and angles tuck the rear face of the gutter underneath the roof finish.
Locate the gutter into the fascia bracket and then press down into position.
After fitting outlets and angles, proceed with fitting the gutter lengths using the same method.

6-Ensure that all fixing surfaces are clean and dry. Place union adjacent to joint in gutter in preparation for fitting. Apply a 6mm bead of low modulus sealant to each side of the joint.

7-After sealant is applied to gutter surfaces place union over joint and press down firmly until the union clips into place on both front and rear face of the gutter.

8-Clean off excess sealant along the edges of the joint. Use the same process for every joint until the work is completed.

Any cut lengths should be de-burred and touched up with touch-up paint supplied prior to installation. For more information or further assistance, please contact us.

Jointing
Aluminium has a coeffi cient of expansion equal to 0.00002348mm per °C on average, this equates to just over 1.4mm per metre on a temperature range of -20°C to +40°C. Typically a 3mm to 4mm expansion gap between the ends of the gutter sections is advisable.
ARP recommend & supply Arbosil 1096 Low Modulus Silicone sealant & it is essential that this or a direct equivalent is used to seal the joints as this will ensure a strong mechanical bond that withstands the forces associated with thermal movement. It is important to observe the sealant manufacturers guidelines concerning application & curing during cold or damp weather conditions & that before assembling the joint all surfaces are clean & free from grease, acetone applied with a soft cloth & wiped dry is recommed. Vintage O.G. gutters have loose internal union connectors that are snapped into position.Having sited the gutter apply 2 x 6mm beads of Arbosil 1096 Low Modulus Silicone sealant to each side of the joint.Carefully offer the union connector into position, clip the rear of the union into place first followed by the front edge,apply sealant to both sides of joint & tool in.Excess sealant should then be removed.

Fixing
It is important that all fixings are suitable for both the substrate and the load. They must therefore be of the appropriate size and of a compatible material to ensure no electrolytic corrosion occurs. ARP recommends that stainless steel (preferably austenitic) screws must be used to fix gutters, whether direct, fascia or rafter bracket fixed.

Composition & Manufacture:
‘Sentinel’ Vintage O.G. gutters are manufactured from Aluminium alloy 6063 T6 to BS1474: 1972 & the product complies to, or exceeds all relevant standards. Fittings for the gutters are formed using fabrication methods involving cut,mitre & welding techniques using specially made jig & forming tools.

Model Specification:
ARP heavy grade ‘Sentinel’ Gutters & fittings to BS 2997 (EN612) using 6063 T6 grade extruded aluminium in accordance with BS 1474: 1974. Profile to be Vintage O.G. 100x75 (2mm), 125 x 100(2mm), 150 x 100 (2.75mm).* Materials to have factory applied Polyester Powder Coat to all significant surfaces in accordance with BS EN 12206 Matt/Satin/Gloss* finish, or alternatively plain aluminium Mill Finish. All to be supplied by Aluminium Roofline Products Ltd,
Joints to be loose union connector sealed by application of Arbosil 1096 Low Modulus Silicone Sealant in accordance with the manufacturer’s specifi cation & guidelines. Gutter to be fixed by fascia brackets at 750mm centres with supplementary brackets at or near fittings. Fixing for brackets to be 5mm x 25mm countersunk stainless steel screws (dependant on substrate).

ARP Sentinel Vintage Ogee Guttering Installation Guide
ARP Sentinel Vintage Ogee Guttering Technical Guide
 

Standard Aluminium BS/RAL Polyester Powder Coating Colour Options


Drainage Central can provide your aluminium order either in a plain aluminium mill finished or Polyester Powder Coated (PPC).

Save time on site by having your order delivered already painted to a colour of your choice.

You can select from any BS/RAL colour.

If you would like a colour swatch sent out please fill in the contact us form here and we will get one to you as quick as possible.

ARP can provide a variety of colours and finishes see below for the standard colours provided.
For other colour options please call us on 03302 230 275 or email us at [email protected].

Please note the image shown below is just an example and a colour swatch is recommended to show true representation.


For any further details please call our customer service team.

125mm (5") x 100mm (4") Snap Fit Aluminium Vintage Ogee 90 Degree External Gutter Angle (image shows internal gutter angle)


Sentinel Vintage O.G. Snap Fit Extruded Aluminium Gutter Angles are available in Mill Finish and in PPC (Polyester Powder Coating)

Aluminium Gutter Angles are supplied with one union connector free of charge

Please note -  All aluminium gutters and fittings are specially ordered and are non-returnable. All PPC items are coated external face only.

Manufacturer: ARP

Product Code: 54VOAX90

Return to product list

From our site to your site as quickly as possible

Delivery Charges

We can offer a free standard delivery service on specific ranges if your order reaches the thresholds stated below (Exclusions Apply). Orders under thesholds below will be charged a delivery fee. All delivery charges are calculated at basket and are dependent on the items ordered. Charge is based on delivery to mainland UK excluding Scottish Highlands and Islands where additional charges may apply – this is determined by the courier delivering the goods. For deliveries to these areas, we are happy to provide a free quotation upon request.

Free Delivery Thresholds
Brett Martin Ranges - Orders over £1600 (Ex VAT)
ARP Ranges - Order over £1200 (Ex VAT)

Free Delivery Exclusions
All Lindab Products
All Pam Saint-Gobain Products


Delivery Dates and Times

Please see here for latest estimated lead times.
Whilst we will make every effort to deliver your goods within the stated/requested time frame, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules, so we would recommend not to start/schedule any work until the goods arrive. Due to logistics of various couriers and suppliers we are unable to give times of deliveries. Deliveries can take place from as earlier as 07:30 right up to 18:00 depending on the courier/haulier and considering local traffic etc.
 

Signing For Your Goods

All deliveries should be signed for, and we would politely request that you sign and clearly print your name so that in the unlikely event that there are any discrepancies we will have a person to contact. If a signature cannot be obtained, we will try to leave the goods in a safe location, but we cannot be held responsible for shortages or damages where goods have not been signed for.
 

Accepting Your Goods

Please thoroughly check you have received all expected items and any shortages/damages must be reported within 48 hours of delivery. Large or palletised goods will be delivered to a hard standing area only. The Customer shall be solely responsible for the unloading of the Goods and the Seller shall not be liable for any damage that occurs during such unloading.
 

Delivery Vehicle

If goods aren't sent buy our own vehicles, they are sent buy reputable carriers such as Tufnell's, DX, DPD and Parcel Force. Heavier goods may be delivered by larger vehicles and will be off loaded by means of a pump truck; the driver will then deliver by means of the pump truck as close as possible to the property whilst remaining on a hard standing surface.
 

Multiple Deliveries

Sometimes goods can be delivered in multiple deliveries, this is due to some items coming direct from suppliers or our own yard. If this is the case, multiple charges will be combined at the basket.
 

Good Advice

Please do not arrange any labour until your materials are on site as we are unable to compensate you in the event of a late delivery.
 
If you have ANY questions about our products, or want to give us some feedback about your shopping experience with us, please feel free to contact us on 03302 230 275 or email our customer services team
 

*excluding VAT

ARP Sentinel Vintage Ogee Guttering And Fittings


We advise that you ensure the fixing background (e.g fascia board) is securely fixed, level and able to support the weight of the gutter at full capacity and that the roof overhang is correct.

Sentinel Vintage Ogee guttering is fitted using fascia brackets. Buildings without fascias may need a different type of bracketry. ARP offer a range of brackets to suit most applications. ARP offer side and top fix rafter arms as well as rise and fall brackets. The latter do not meet current BS/EN load requirements so advise should be sort on the parameter of their use.

1-Start by deciding whether to fit the gutter level or with a fall to 1:600. Fit a bracket at each end of a run. Position brackets correctly for an angle or stopend.

2- The image above shows the bracket for the angle and a bracket to take the gutter length.

3-It is recommend fixing brackets every 750mm and using an additional bracket for each outlet or angle. Ideally using a string line or laser level between the two brackets, set out intermediate brackets at maximum centres of 750mm.

4-With the use of a plumb or laser line, position outlets over gullies and support
with at least one bracket. Also include a bracket per angle (internal or external).

5-When fitting outlets and angles tuck the rear face of the gutter underneath the roof finish.
Locate the gutter into the fascia bracket and then press down into position.
After fitting outlets and angles, proceed with fitting the gutter lengths using the same method.

6-Ensure that all fixing surfaces are clean and dry. Place union adjacent to joint in gutter in preparation for fitting. Apply a 6mm bead of low modulus sealant to each side of the joint.

7-After sealant is applied to gutter surfaces place union over joint and press down firmly until the union clips into place on both front and rear face of the gutter.

8-Clean off excess sealant along the edges of the joint. Use the same process for every joint until the work is completed.

Any cut lengths should be de-burred and touched up with touch-up paint supplied prior to installation. For more information or further assistance, please contact us.

Jointing
Aluminium has a coeffi cient of expansion equal to 0.00002348mm per °C on average, this equates to just over 1.4mm per metre on a temperature range of -20°C to +40°C. Typically a 3mm to 4mm expansion gap between the ends of the gutter sections is advisable.
ARP recommend & supply Arbosil 1096 Low Modulus Silicone sealant & it is essential that this or a direct equivalent is used to seal the joints as this will ensure a strong mechanical bond that withstands the forces associated with thermal movement. It is important to observe the sealant manufacturers guidelines concerning application & curing during cold or damp weather conditions & that before assembling the joint all surfaces are clean & free from grease, acetone applied with a soft cloth & wiped dry is recommed. Vintage O.G. gutters have loose internal union connectors that are snapped into position.Having sited the gutter apply 2 x 6mm beads of Arbosil 1096 Low Modulus Silicone sealant to each side of the joint.Carefully offer the union connector into position, clip the rear of the union into place first followed by the front edge,apply sealant to both sides of joint & tool in.Excess sealant should then be removed.

Fixing
It is important that all fixings are suitable for both the substrate and the load. They must therefore be of the appropriate size and of a compatible material to ensure no electrolytic corrosion occurs. ARP recommends that stainless steel (preferably austenitic) screws must be used to fix gutters, whether direct, fascia or rafter bracket fixed.

Composition & Manufacture:
‘Sentinel’ Vintage O.G. gutters are manufactured from Aluminium alloy 6063 T6 to BS1474: 1972 & the product complies to, or exceeds all relevant standards. Fittings for the gutters are formed using fabrication methods involving cut,mitre & welding techniques using specially made jig & forming tools.

Model Specification:
ARP heavy grade ‘Sentinel’ Gutters & fittings to BS 2997 (EN612) using 6063 T6 grade extruded aluminium in accordance with BS 1474: 1974. Profile to be Vintage O.G. 100x75 (2mm), 125 x 100(2mm), 150 x 100 (2.75mm).* Materials to have factory applied Polyester Powder Coat to all significant surfaces in accordance with BS EN 12206 Matt/Satin/Gloss* finish, or alternatively plain aluminium Mill Finish. All to be supplied by Aluminium Roofline Products Ltd,
Joints to be loose union connector sealed by application of Arbosil 1096 Low Modulus Silicone Sealant in accordance with the manufacturer’s specifi cation & guidelines. Gutter to be fixed by fascia brackets at 750mm centres with supplementary brackets at or near fittings. Fixing for brackets to be 5mm x 25mm countersunk stainless steel screws (dependant on substrate).

ARP Sentinel Vintage Ogee Guttering Installation Guide
ARP Sentinel Vintage Ogee Guttering Technical Guide
 

Standard Aluminium BS/RAL Polyester Powder Coating Colour Options


Drainage Central can provide your aluminium order either in a plain aluminium mill finished or Polyester Powder Coated (PPC).

Save time on site by having your order delivered already painted to a colour of your choice.

You can select from any BS/RAL colour.

If you would like a colour swatch sent out please fill in the contact us form here and we will get one to you as quick as possible.

ARP can provide a variety of colours and finishes see below for the standard colours provided.
For other colour options please call us on 03302 230 275 or email us at [email protected].

Please note the image shown below is just an example and a colour swatch is recommended to show true representation.


For any further details please call our customer service team.
Related Products
125mm vintage ogee aluminium snap fit gutter x 3m

125mm Vintage Ogee Aluminium Snap Fit Gutter x 1m

ARP Sentinel 125mm x 100mm Vintage O.G. Snap-fit Aluminium Gutter x 1m 54VOG1 available in a Plain Mill or Powder Coated Finish
£37.36
(Ex £31.13)
View Options
125mm vintage ogee aluminium snap fit gutter x 3m

125mm Vintage Ogee Aluminium Snap Fit Gutter x 2m

ARP Sentinel 125mm x 100mm Vintage O.G. Snap-fit Aluminium Gutter x 2m 54VOG2 available in a Plain Mill or Powder Coated Finish
£62.60
(Ex £52.17)
View Options
125mm vintage ogee aluminium snap fit gutter x 3m

125mm Vintage Ogee Aluminium Snap Fit Gutter x 2.5m

ARP Sentinel 125mm x 100mm Vintage O.G. Snap-fit Aluminium Gutter x 2.5m 54VOG2.5 available in a Plain Mill or Powder Coated Finish
£75.32
(Ex £62.77)
View Options
125mm vintage ogee aluminium snap fit gutter x 3m

125mm Vintage Ogee Aluminium Snap Fit Gutter x 3m

ARP Sentinel 125mm x 100mm Vintage O.G. Snap-fit Aluminium Gutter x 3m 54VOG3 available in a Plain Mill or Powder Coated Finish
£131.08
(Ex £109.23)
View Options
125mm Vintage Ogee Aluminium Snap Fit Gutter Fascia Bracket

125mm Vintage Ogee Aluminium Snap Fit Gutter Fascia Bracket

ARP Sentinel 125mm x 100mm Vintage O.G. Snap-fit Aluminium Gutter Bracket 54VOBF available in a Plain Mill or Powder Coated Finish
£8.53
(Ex £7.11)
View Options
125mm vintage ogee aluminium snap fit gutter union

125mm Vintage Ogee Aluminium Snap Fit Gutter Union

ARP Sentinel 125mm x 100mm Vintage O.G. Snap-fit Aluminium Gutter Union Connector 54VOUC available in a Plain Mill or Powder Coated Finish
£5.79
(Ex £4.83)
View Options
125mm vintage ogee aluminium snap fit gutter left hand stopend

125mm Vintage Ogee Aluminium Snap Fit Gutter Left Hand Stopend

ARP Sentinel 125mm x 100mm Vintage O.G. Snap-fit Aluminium Gutter Stop End Left Hand 54VOSEL available in a Plain Mill or Powder Coated Finish
£15.02
(Ex £12.52)
View Options
125mm vintage ogee aluminium snap fit gutter outlet 63mm round

125mm Vintage Ogee Aluminium Snap Fit Gutter Outlet 63mm Round

ARP Sentinel 125mm x 100mm Vintage O.G. Snap-fit Aluminium Gutter Outlet (63mm Round) 54VOO2R available in a Plain Mill or Powder Coated Finish
£29.78
(Ex £24.82)
View Options
Customer Reviews (0)