150mm Cast Iron Halifax Soil 88 Degree Long Radius Bend With Door
Hargreaves Halifax Soil is a socketless, mechanically jointed cast iron soil and wastewater system. A ‘fit and forget’ system which has been designed to minimise installation difficulties and maintenance costs over its lifetime. Cast iron products are proven to be reliable, durable, and strong. They are safe, non-combustible, quiet and with minimal maintenance will last the life of a building. Cast iron is a sustainable material and can be fully recycled without any loss of its original properties.
The Halifax Soil system pipes are coated with a two part epoxy finish, red exterior and yellow interior, which provides improved performance when exposed to aggressive substances. The fittings are also epoxy coated in red.
The Halifax system is covered by third party certification. This provides confirmation that the system is fully compliant with the BS EN877 standard.
- Access pipe used for inspection and rodding point to remove blockages
- Pipe should be supported at every change in direction
- Mechanically jointed, socketless system certified by BBA and BSI Kitemark
Manufacturer: Hargreaves Foundry
Product Code:HS6011
Return to product list
From our site to your site as quickly as possible
Delivery Charges
We can offer a free standard delivery service on specific ranges if your order reaches the thresholds stated below (Exclusions Apply). Orders under thesholds below will be charged a delivery fee. All delivery charges are calculated at basket and are dependent on the items ordered. Charge is based on delivery to mainland UK excluding Scottish Highlands and Islands where additional charges may apply – this is determined by the courier delivering the goods. For deliveries to these areas, we are happy to provide a free quotation upon request.
Free Delivery Thresholds
Brett Martin Ranges - Orders over £1600 (Ex VAT)
ARP Ranges - Order over £1200 (Ex VAT)
Free Delivery Exclusions
All Lindab Products
All Pam Saint-Gobain Products
Delivery Dates and Times
Please see here for latest estimated lead times.
Whilst we will make every effort to deliver your goods within the stated/requested time frame, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules, so we would recommend not to start/schedule any work until the goods arrive. Due to logistics of various couriers and suppliers we are unable to give times of deliveries. Deliveries can take place from as earlier as 07:30 right up to 18:00 depending on the courier/haulier and considering local traffic etc.
Signing For Your Goods
All deliveries should be signed for, and we would politely request that you sign and clearly print your name so that in the unlikely event that there are any discrepancies we will have a person to contact. If a signature cannot be obtained, we will try to leave the goods in a safe location, but we cannot be held responsible for shortages or damages where goods have not been signed for.
Accepting Your Goods
Please thoroughly check you have received all expected items and any shortages/damages must be reported within 48 hours of delivery. Large or palletised goods will be delivered to a hard standing area only. The Customer shall be solely responsible for the unloading of the Goods and the Seller shall not be liable for any damage that occurs during such unloading.
Delivery Vehicle
If goods aren't sent buy our own vehicles, they are sent buy reputable carriers such as Tufnell's, DX, DPD and Parcel Force. Heavier goods may be delivered by larger vehicles and will be off loaded by means of a pump truck; the driver will then deliver by means of the pump truck as close as possible to the property whilst remaining on a hard standing surface.
Multiple Deliveries
Sometimes goods can be delivered in multiple deliveries, this is due to some items coming direct from suppliers or our own yard. If this is the case, multiple charges will be combined at the basket.
Good Advice
Please do not arrange any labour until your materials are on site as we are unable to compensate you in the event of a late delivery.
If you have ANY questions about our products, or want to give us some feedback about your shopping experience with us, please feel free to contact us on 03302 230 275 or email our customer services team
*excluding VAT
Halifax Soil Installation & Technical Guides
Halifax Soil is a mechanically jointed, socketless system manufactured to BS EN 877:1999 + A1:2006 (Incorporating corrigendum Jan 2008) and are CE marked in compliance with the EU Construction Products regulations (305/2011).
Please see all relevant installation details below. For full technical and installation documentation from the manufacturer can be found at the bottom of the page
Please see all technical and installation details below.
Jointing Methods for Couplings
Ductile Iron Coupling
Part No’s.: HS2012, HS3012, HS4012, HS6012, HS8012, HD4012, HD6012, HD8012
Step 1
Check the components – two-part coupling and EPDM gasket, 2 x M8 bolts and nuts (up to 100 mm diameter pipes, 4 x M8 nuts and bolts for 150mm diameter and above). Ensure the 2 grub screws for electrical continuity are present (shown below inserted into casting).
Step 2
Fit the gasket to the lower pipe/fitting first, line up the upper component and fit carefully into place. Make sure the two components are square and parallel and line up correctly with the gasket.
Step 3
Line up the two parts of the coupling ensuring they fit correctly over the gasket. At this point check that the two grub screws for electrical continuity do not protrude on the inside of the coupling.
Step 4
Bolt the two parts of the coupling together and gradually tighten, ensuring an equal distance is maintained during assembly. Do not over tighten or tighten only one side at a time. We recommend the use of a torque wrench at 15Nm.
Step 5
Adjust the grub screws until each is lightly touching the pipe then give them a final half turn. This normally will be adequate to allow metal to metal contact and provide electrical continuity – do not over tighten.
Rapid Connect Coupling
Part Numbers’s : HS2002, HS3002, HS4002, HS6002, HS8002
Step 1
Rapid connect pipe coupling supplied complete with EPDM gasket and electrical continuity provision.
Step 2
Push the coupling onto the end of the pipe or fitting up to the gasket’s central register.
Step 3
Push the next pipe or fitting into the coupling making sure that the cut pipes are square.
Step 4
Tighten the set screw using;
• 6mm allen key /socket adaptor (50 – 150mm)
• 8mm allen key/socket adaptor (200mm)
Note: due to the block tightening feature the joint cannot be overtightened and this also ensures the sharp edges of coupling cut through the painted finish to provide electrical continuity.
