75mm Heritage Timesaver Cast Iron Soil Pipe Short Radius 45 Degree Rear Access Bend
Saint-Gobain PAM UK Cast Iron Timesaver Soil Pipe System is Available in a range of pipe diameters with an exstensive range of fittings and to suit any project.
Saint-Gobain PAM UK are market leaders in the supply of Cast iron soil, drainage and rainwater systems.
Benefits of Cast Iron
- Non-combustible fire rated A1
- Excellent acoustic properties
- Minimal expansion
- Strong and robust
- Excellent environmental properties
- Made from up to 99% recycled content
- 100% recyclable
- Long life span
Timesaver Soil Coating
- 3m Pipes Internally lined with an ochre two-part epoxy coating
- Externally coated in a black acrylic paint.
- Fittings and couplings, Internally and externally coated in a black waterbased paint
- The Timesaver coating shall accept over-coating (Overpainting) with alkyd and water based paints normally used on metallic structures
The Cast Iron Soil Pipe Timesaver range include heritage push-fit couplings that turns a mechanical pipe system into a system with the traditional cast iron appearance.
The Timesaver Heritage couplings have been accepted by recognised bodies for all grade listed properties ie. National Heritage, English Heritage etc. Its primer black coating makes it easy to overpaint for external soil stacks, and is the perfect solution for listed buildings and those situated in areas of conservation.
Prestigious commercial buildings built in the 1970’s to the mid 90’s which are serviced by cast iron soil stacks, will most likely be Timesaver. If the building is to be refurbished and changes are required, the latest Timesaver range is best suited to connect to the original pipework.
Please Note: Timesaver soil fittings were traditionally supplied with a raised bead on the spigot ends, which over the years have been removed. The Heritage couplings can only be used on fittings without the bead.
Manufacturer: Saint-Gobain PAM UK
Product Code: 191637
Return to product list
 
From our site to your site as quickly as possible
Delivery Charges
We can offer a free standard delivery service on specific ranges if your order reaches the thresholds stated below (Exclusions Apply). Orders under thesholds below will be charged a delivery fee. All delivery charges are calculated at basket and are dependent on the items ordered. Charge is based on delivery to mainland UK excluding Scottish Highlands and Islands where additional charges may apply – this is determined by the courier delivering the goods. For deliveries to these areas, we are happy to provide a free quotation upon request.
Free Delivery Thresholds
Brett Martin Ranges - Orders over £1600 (Ex VAT)
ARP Ranges - Order over £1200 (Ex VAT)
Free Delivery Exclusions
All Lindab Products
All Pam Saint-Gobain Products
Delivery Dates and Times
Please see here for latest estimated lead times.
Whilst we will make every effort to deliver your goods within the stated/requested time frame, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules, so we would recommend not to start/schedule any work until the goods arrive. Due to logistics of various couriers and suppliers we are unable to give times of deliveries. Deliveries can take place from as earlier as 07:30 right up to 18:00 depending on the courier/haulier and considering local traffic etc.
Signing For Your Goods
All deliveries should be signed for, and we would politely request that you sign and clearly print your name so that in the unlikely event that there are any discrepancies we will have a person to contact. If a signature cannot be obtained, we will try to leave the goods in a safe location, but we cannot be held responsible for shortages or damages where goods have not been signed for.
Accepting Your Goods
Please thoroughly check you have received all expected items and any shortages/damages must be reported within 48 hours of delivery. Large or palletised goods will be delivered to a hard standing area only. The Customer shall be solely responsible for the unloading of the Goods and the Seller shall not be liable for any damage that occurs during such unloading.
Delivery Vehicle
If goods aren't sent buy our own vehicles, they are sent buy reputable carriers such as Tufnell's, DX, DPD and Parcel Force. Heavier goods may be delivered by larger vehicles and will be off loaded by means of a pump truck; the driver will then deliver by means of the pump truck as close as possible to the property whilst remaining on a hard standing surface.
Multiple Deliveries
Sometimes goods can be delivered in multiple deliveries, this is due to some items coming direct from suppliers or our own yard. If this is the case, multiple charges will be combined at the basket.
Good Advice
Please do not arrange any labour until your materials are on site as we are unable to compensate you in the event of a late delivery.
If you have ANY questions about our products, or want to give us some feedback about your shopping experience with us, please feel free to contact us on 03302 230 275 or email our customer services team
*excluding VAT
PAM Saint-Gobain Heritage Cast Iron Timesaver Soil Pipe Installation Guidance
Heritage Jointing Method
1. Apply a small amount of lubricant (ie. silicone grease) on the lip of the rubber gaskets, both ends, to ease insertion of pipe/fittings.
2. Push coupling over the end of pipe/fitting, ensuring the central register is abutted against the spigot edge evenly. If the coupling is eared, fix to wall using anti-corrosion coach screws or similar.
3. Push the second pipe or fitting into the gasket again ensuring that the spigot is abutted against the central register. Timesaver Heritage couplings eared/plain can be fitted to most fittings within the 50, 75 and 100 diameter ranges.
Three joints used on branches can be very close fitting, in some cases they virtually touch. To accommodate this, the plain joint is designed with a flat area which should be lined up with the adjoining socket, to give maximum clearance (see Fig. 39).
Generally when plain sockets are used, ensure flat area is positioned at
the rear of the pipe (nearest the wall) away from view.
Existing systems
If breaking into an existing Timesaver system, a slip joint should be ordered which is designed with a reduced central register. The joint is made by slipping the whole socket onto the pipe, positioning the new fitting then sliding the socket into the desired position.
Connection to conventional soil
Timesaver can connect directly to 90mm (3½") conventional soil by inserting a traditional gasket into the Timesaver Heritage coupling, product code 156132, replacing one of the standard gaskets.
Lubricate the spigot of the 90mm pipe, and push coupling over the pipe inserting 35mm only. Ensure the 90mm pipe is securely fixed to prevent slipping into new pipework.
Heritage design recommendations
When designing a stack using the new push-fit joint, all fittings require at least one eared socket, to anchor the system to the building. Taking branches as an example, eared joints could be used at the top and bottom of the vertical section to anchor the system, with a plain joint used on the branch arm.
The rubber seals are factory fitted to the socket, and a suitable lubricant (silicone grease) is recommended to ease assembly.
Note:
Timesaver soil fittings were traditionally supplied with a raised bead on the spigot ends, which over the years have been removed. The Heritage couplings can only be used on fittings without the bead.
On-site protection
The coating for the Timesaver system is regarded as a primer protection. Therefore when specified for external soil stacks, must be overpainted in accordance with manufacturers recommendations
New restraining brackets EF053 and EF053A. These brackets are designed to give support to the system when in an offset situation. See typical installation below.
Technical references
It is recommended that these and other listed technical advice, within this manual, are read in conjunction with the following Codes of Practice:
BS EN 12056 Gravity Drainage Systems Inside Building:
Part 2 – Sanitary Pipework
Part 3 – Roof Drainage
BS EN 752 Drains and Sewers Outside Building.
BS 437 and BS 416 Part 2.
Technical Guides
PAM Saint-Gobain Cast Iron Timesaver Soil Pipe Guide
PAM Saint-Gobain Cast Iron Soil and Drain Standards Guide
Any other questions please click here to see the contact us page.