The 100mm Ensign Cast Iron Double Spigot Soil Pipe x 3m are manufactured through the De Lavaud process, which provides greater impact and crush resistance, but also a surface hardness that makes the pipe easy to cut.

The 100mm Ensign Soil Ductile Iron Pipe Bracket are to be used for holding your cast iron pipe and fittings vertically or horizontally to structural elements

The 100mm Ensign Soil Ductile Iron Acoustic Dampener Pipe Bracket reduce the noise within a building. The brackets are to be used for holding your cast iron pipe and fittings vertically or horizontally to structural elements.

The 100mm Ensign Soil Ductile Iron Double Braced Pipe Bracket are used for holding your cast iron pipe and fittings vertically or horizontally to structural elements for example, walls and floors in opposing positions.

The 100mm Ensign Soil Rubber Lined Steel Bracket incorporate an elastomer rubber lining to enhance structure-borne acoustic qualities when holding cast iron pipe and fittings vertically or horizontally to walls and/or floors.

The 100mm Ensign Soil Rapid Coupling is a single bolt Rapid NG coupling assembled using a captive socket cap screw driven by a 6mm allen key.

The 100mm Cast Iron Ensign Soil 2 Piece Coupling are used to join pipes and/or fittings together.

The 100mm Ensign Soil Grip Collars are designed to over-clamp a two-piece ductile iron or stainless-steel mechanical coupling.

The 100mm Ensign Soil Slim High Performance Couplings are slip couplings and are to be used when space between some fittings is tight. They are 65mm wide.

The 100mm Ensign Soil High Performance Coupling With Grip are designed for high pressure areas. Each coupling is manufactured from stainless-steel and is fitted with a anchoring grip ring.

The 100mm Ensign Soil High Performance Coupling are designed for high pressure areas.

100mm Cast Iron Ensign Soil Short Radius Bends can be used independently or in combinations to achieve your bend requirements.

100mm Cast Iron Ensign Soil 22 Degree Long Radius Bends are commonly positioned at the base of a soil stack in accordance with BS EN 12056 part 2 design guidance.

100mm Cast Iron Ensign Soil 88 Degree Long Radius Bends are commonly positioned at the base of a soil stack in accordance with BS EN 12056 part 2 design guidance.

100mm Cast Iron Ensign Soil Short Radius 88 Degree Access Bends effectively change the direction of your system whilst providing access to clear any blockages or debris through the rear access door on the bend.

100mm Cast Iron Ensign Soil Long Radius 88 Degree Access Bends effectively change the direction of your system whilst providing access to clear any blockages or debris through the rear access door on the bend.

100mm Cast Iron Ensign Soil Access Pipes are available with either a round or rectangular door with an EPDM elastomer seal, allowing you to enter the soil stack to remove any debris or blockages

100mm Cast Iron Ensign Soil Corner Manifold Connectors are multi-connectors that are designed to save space by grouping waste pipes (small diameter pipework such as sinks, basins, bidets, urinals, or showers) from various sources to a single point just above floor level.

100mm Cast Iron Ensign Soil Manifold Connectors are multi-connectors that are designed to save space by grouping waste pipes (small diameter pipework such as sinks, basins, bidets, urinals, or showers) from various sources to a single point just above floor level.

100mm Cast Iron Ensign Soil Branches are available in a wide range of angles and sizes including reducing branches when connecting two different pipe sizes together, so you can create the desired connection for your project.