The 200mm Ensign Cast Iron Double Spigot Soil Pipe x 3m are manufactured through the De Lavaud process, which provides greater impact and crush resistance, but also a surface hardness that makes the pipe easy to cut.

The 200mm Cast Iron Ensign Soil 2 Piece Coupling are used to join pipes and/or fittings together.

The 200mm Ensign Soil Rapid Coupling is a single bolt Rapid NG coupling assembled using a captive socket cap screw driven by a 6mm allen key.

The 200mm Ensign Soil Grip Collars are designed to over-clamp a two-piece ductile iron or stainless-steel mechanical coupling.

The 200mm Ensign Soil High Performance Coupling are designed for high pressure areas.

The 200mm Ensign Soil High Performance Coupling With Grip are designed for high pressure areas. Each coupling is manufactured from stainless-steel and is fitted with a anchoring grip ring.

200mm Cast Iron Ensign Soil Short Radius Bends can be used independently or in combinations to achieve your bend requirements.

200mm Cast Iron Ensign Soil Branches are available in a wide range of angles and sizes including reducing branches when connecting two different pipe sizes together, so you can create the desired connection for your project.

200mm Cast Iron Ensign Soil 45 Degree Double Branches allows double lateral connection into the main soil or rainwater stack. Corner and reducing branches also available.

200mm Cast Iron Ensign Soil 88 Degree Swept Radius Branches are designed to maximise the lateral discharge flow from a WC into the main vertical soil stack in accordance with BS EN 12056 part2.

200mm x 150mm Cast Iron Ensign Soil 88 Degree Reducing Swept Branches are designed to maximise the lateral discharge flow from a WC into the main vertical soil stack in accordance with BS EN 12056 part2.

200mm Cast Iron Ensign Soil 45 Degree Reducing Branches are available in a wide range of angles and sizes including reducing branches when connecting two different pipe sizes together, so you can create the desired connection for your project.

The 200mm Ensign Soil Ductile Iron Pipe Bracket are to be used for holding your cast iron pipe and fittings vertically or horizontally to structural elements

The 200mm Ensign Soil Rubber Lined Steel Bracket incorporate an elastomer rubber lining to enhance structure-borne acoustic qualities when holding cast iron pipe and fittings vertically or horizontally to walls and/or floors.

200mm Cast Iron Ensign Soil Complete Stack Supports include the stack support pipe and bracket with gasket which provides additional support to vertical soil stacks on multi story buildings. It is used with a wall bracketing system.

The 200mm Ensign Soil Slim High Performance Couplings are slip couplings and are to be used when space between some fittings is tight. They are 65mm wide.

200mm Cast Iron Ensign Soil Blank Ends allow you temporarily or permanently cap off a pipe of fitting.

200mm Cast Iron Ensign Soil Expansion Plugs seal a pipe and/or fittings temporarily or indefinitely, on gravity drainage networks.

200mm Cast Iron Ensign Soil Access Pipes are available with either a round or rectangular door with an EPDM elastomer seal, allowing you to enter the soil stack to remove any debris or blockages

Ensign Soil Lubricant for Push Fit Assembly 500g